General Introduction
Flow-Reactor (FFR) has a channel size between 10 um to 500um which manufactured by means of precision machining. The common feature of the reactor is the chemical reactions occur in tiny spaces with an average channel size of 1-3.5mm. Flow-Reactor contains thousands of tiny channels that achieve high yields.
Flow-Reactor have a small size channel and channel diversity in which the fluid flows and chemical reaction takes place in these channels. So that the micro-channel of the chemical equipment has a very large surface area and volume ratio.
The micro-channel reactor reacts with the principle of repeated impact driven by the high pressure plunger pump, by this way it can shorten the reaction time, reduce the occurrence of side reaction, completely eliminate the amplification effect, and improve the reaction yield.The micro-channel reactor is a three-dimensional structural element for the advancement of chemical reactions, made of a solid substrate using titanium alloy, zirconium alloy, and helium alloy as the main material, employing special processing technology. This can increase the surface contact probability, making the reaction complete.
Suitable chemical reactions: Sulfonation, Grignard, Hydrogenation, Nitration, Oxidation, Esterification, Diazotization and other chemical reactions.
Compared with traditional chemical processes, the micro-reaction process achieves strong heat transfer and mass transfer, while the chemical process can.Faster mass transfer and heat transfer,Lager specific volume, short diffusion distance high transfer , efficiency is 2-3 orders of magnitude higher than conventional equipment.Better time and space yield.Reduce or eliminate by-products, improve selectivity, and yield.ield, simplify process andIncreaseproductivity
More safe and environmental protection.
Modular device the reaction process closed continuously, instantaneous holding small, high degree of automation, precise control response more economical and energy saving.
More economical and energy saving
No amplification reduce the pliot process, shorten the development cycle, small room cover, greatly reducing investment costs and energy consumption.
